Alkyd Primer is a single pack oil based primer/undercoat for use on steel, wood and aluminium surfaces where Pilot II is the desired finish coat. It can also be used as a topcoat when a matt finish is required.
Penguard HB is a high build, two-pack pure epoxy primer. It is ideal for application on GRP or gelcoat as it provides excellent waterproofing and will help prevent osmosis.
Jotun Pioner Topcoat is a single pack, semi-gloss, acrylic topcoat which is suitable for use both above and below the waterline.
Racing is a hard antifouling that gives a smooth and polishable surface and also ensures no chalking. It is suitable for boats cruising in all ranges of speed, and is ideal for fast motor boats.
Vinyguard Silvergrey is a quick drying, modified vinyl primer, recommended as a tie coat or as a sealer for an antifouling system. It is very water resistant and is excellent above and below the waterline as part of a single pack paint system.
Premium self-polishing antifouling with a commercial grade biocide to give service interval of up to three years.
Easy to apply, high gloss topcoat with excellent durability and colour retention.
A 2-pack high build epoxy primer for use above or below the waterline, or as a build coat over Shield Surface Tolerant Epoxy Primer.
Easy to apply, low sheen topcoat with excellent durability and colour retention.
Ballastic Black is a traditional bitumen hull blacking. It has a higher percentage of volume solids than both Intertuf 16 and Rylards Rytex, It can be applied on bare steel or over existing coatings.
A high build epoxy with extended durability, suitable for use above and below the waterline.
STRIPPIT antifouling remover has been designed to remove old antifouling from GRP & wooden craft with the minimum of effort without damaging the gel coat or epoxy coatings. (Do not use on bare timber). It is effective on most types of self polishing and leaching antifouling.
Premium self-polishing antifouling with a commercial grade biocide to give service interval of up to three years.
SML Yacht varnish has a neutral gloss finish with excellent water resistance, has a very durable finish and dries quickly. Available in 1L, 2.5L and 5L sizes.
Jotamastic Smartpack HB is a two-pack surface tolerant high solids, high build epoxy primer coat for use on steel.
Alkyd Primer is a single pack oil based primer/undercoat for use on steel, wood and aluminium surfaces where Pilot II is the desired finish coat. It can also be used as a topcoat when a matt finish is required.
Penguard HB is a high build, two-pack pure epoxy primer. It is ideal for application on GRP or gelcoat as it provides excellent waterproofing and will help prevent osmosis.
Jotun Pioner Topcoat is a single pack, semi-gloss, acrylic topcoat which is suitable for use both above and below the waterline.
Racing is a hard antifouling that gives a smooth and polishable surface and also ensures no chalking. It is suitable for boats cruising in all ranges of speed, and is ideal for fast motor boats.
Vinyguard Silvergrey is a quick drying, modified vinyl primer, recommended as a tie coat or as a sealer for an antifouling system. It is very water resistant and is excellent above and below the waterline as part of a single pack paint system.
Premium self-polishing antifouling with a commercial grade biocide to give service interval of up to three years.
Easy to apply, high gloss topcoat with excellent durability and colour retention.
A 2-pack high build epoxy primer for use above or below the waterline, or as a build coat over Shield Surface Tolerant Epoxy Primer.
Easy to apply, low sheen topcoat with excellent durability and colour retention.
Ballastic Black is a traditional bitumen hull blacking. It has a higher percentage of volume solids than both Intertuf 16 and Rylards Rytex, It can be applied on bare steel or over existing coatings.
A high build epoxy with extended durability, suitable for use above and below the waterline.
STRIPPIT antifouling remover has been designed to remove old antifouling from GRP & wooden craft with the minimum of effort without damaging the gel coat or epoxy coatings. (Do not use on bare timber). It is effective on most types of self polishing and leaching antifouling.
Premium self-polishing antifouling with a commercial grade biocide to give service interval of up to three years.
SML Yacht varnish has a neutral gloss finish with excellent water resistance, has a very durable finish and dries quickly. Available in 1L, 2.5L and 5L sizes.
Jotamastic Smartpack HB is a two-pack surface tolerant high solids, high build epoxy primer coat for use on steel.
PLEASE READ THIS FIRST IF YOU HAVE NOT USED MARINE PAINTS BEFORE
A typical paint system will usually comprise of a primer and a topcoat onto a prepared bare substrate such as metal, GRP/fibreglass/gelcoat, wood or concrete. The primer serves as a thicker, protective layer and/or provides a good surface for a topcoat. The topcoat is usually a much thinner coating that provides an aesthetic finish and a final colour. With modern paints a mid-coat or undercoat is not always required especially if the primer can be mixed in a colour to complement the topcoat. Read More